The Stainless Steel Elecro Heaters are perfect for chlorinated in-ground, above ground and splasher pools.

The latest Elecro Pool heaters have evolved from the 800 Series. These units come fully equipped and pre-wired including a super sensitive flow switch, that allows safe coupling to Intex, Costco, Macro and Argos type splasher pools.

They also come complete with a control thermostat, safety thermostat and integral contactor relay.
The heaters are very easy to install, requiring only final connection to a mandatory separate RCD.No pump interterlock is required. All heaters come fitted with 1½" BSP female threaded adapters for easy connection to all pipework.

All heaters are supplied with hose tail adapters for connection to flexible pipework, and heater sizes 12-kW through to 18-kW are also supplied with 1½" BSP unions for connection to rigid pipework.

Stainless steel heaters are suitable for use with chlorinated pools & are NOT suitable for salt water pools. If you have a salt water pool it is essential that you use a Titanium heater that are suitable for any pool including salt-water installations.

Key Features

Control Thermostat
Separate Safety Thermostat
Integral Contactor Relay
Reversible Flow Switch, Allowing Water Input From Either Direction

The latest Elecro EVO pool heaters have evolved from the 800 Series. These units come fully equipped and pre-wired including a super sensitive flow switch, that allows safe coupling to Intex, Costco, Macro and Argos type splasher pools. They also come complete with a control thermostat, safety thermostat and integral contactor relay.

The heaters are very easy to install, requiring only final connection to a mandatory separate RCD.No pump interterlock is required. All heaters come fitted with 1½" BSP female threaded adapters for easy connection to all pipework. All heaters are supplied with hose tail adapters for connection to flexible pipework, and heater sizes 12-kW through to 18-kW are also supplied with 1½" BSP unions for connection to rigid pipework.

Stainless steel heaters are suitable for use with chlorinated pools & are NOT suitable for salt water pools.

The latest Elecro EVO pool heaters have evolved from the 800 Series. These units come fully equipped and pre-wired including a super sensitive flow switch, that allows safe coupling to Intex, Costco, Macro and Argos type splasher pools. They also come complete with a control thermostat, safety thermostat and integral contactor relay.

The heaters are very easy to install, requiring only final connection to a mandatory separate RCD.No pump interterlock is required. All heaters come fitted with 1½" BSP female threaded adapters for easy connection to all pipework. All heaters are supplied with hose tail adapters for connection to flexible pipework, and heater sizes 12-kW through to 18-kW are also supplied with 1½" BSP unions for connection to rigid pipework.

Stainless steel heaters are suitable for use with chlorinated pools & are NOT suitable for salt water pools.

Solar Pod operates by harnessing the free energy from the sun and transferring it into your pool water. One Solar Pod is ideal for pool up to 4,500 litres of water. For larger pools simpley install more units in series.

The Solar Pod from Plastica works by harnessing the energy from the sun and transfering it into your pool water using "heat trap" technology with glass house effect which captures energy within the ultra-clear polycarbonate heat exchanger. Solar Pod's clear dome alos reduces heat loss from its heat exchanger casued by wind exposure.

The compact, contemporary design makes the Solar Pod an attractive addition to your garden.

Requires only a Philips Screwdriver and a silicone lubricant. Simply wipe the Solar Pods over with a non-abrassive cloth and store in a frost free location for the winter season.

One pod is suitable for pools up to 4,500 litres. For larger pools simply connect several units in series.

Kit Includes:
Main base with stand
1.25" to 1.5" hose reducer
Collared tube adaptor
Hose clamps
Thick connector gasket
1m Hose
Side hose connector x 2
380mm hose
Clear Dome
Solar protection cover

A heating system that can pay for itself in one season. By investing in an El Nino solar heating system you can expect to increase your pool temperature by approx 7-10°c throughout the summer.


Splasher type swimming pools have the same requirements as any other pool, they all need heat. By investing in an El Nino solar heating system you can expect to increase your pool temperature by approx 7-10°c throughout the summer. In addition to enhancing the bathing experience, El Nino is also an economical and environmentally friendly investment. The expensive alternative is using domestic electricity (3kw electric heater - approx 30p per hour running cost) to achieve a comfortable bathing temperature.
A heating system that pays for itself I none year
Suitable for all splasher pools
Heats water to a pleasant temperature
Low weight, simple to use and repairable
Easy to stow away when not in use
No complicated installation - it uses the existing filter pump
Economical and environmentally friendly way to heat the pool

Please Note: A 'Basic Kit' includes the solar collector unit (2pcs of solar collectors) and coupling devices to connect the solar collectors to the pool. The only thing needed in addition to the basic kit is a few metres of ordinary garden hose.

Basic Kit is suitable for pools up to 7m2. For larger pools, the system is easily increased by adding more basic kits or an expansion kit.