Pool Tester for the measurement of pH, Chlorine, Bromine, and Alkalinity values. 3 Chamber with 8 scale values.

"Pooltesters" aere test devices which operate with the help of visual comparisons. The water that is to be measured is placed into the tester, rapidly dissolving (RAPID) Reagent Tablets are added, and the water changes colour. The value is determined by comparing the coloured test water with the scale in the margin. The finer the scale the easier it is to classify the test results. Pool i.d Pooltesters distinguish themselves through their very finely graduated colour scales.

The Pooltester "pH/Chlorine/Bromine" has 16 comparison colours to identify chlorine. Chlorine and bromine are detected with the aid of DPD N°1 tablets, both using the same comparative-colour-scale. Pool-i.d Pooltesters come with 30 tablets per test parameter.

5 in 1 Test Strips for the measurment of pH, free chlorine, bromine alkalinity, total hardness and cyanuric acid. Each 10 of the 50 strips are vacuum packed in foil.

Test strips for the measurement of water values are enjoying greater popularity because they provide a simple and rapid method for quick anaylsis.

The Easy-Dip Test Strips are packed ten each in foil packs which guarantee that even the last strip can be used. In addition, the graphic "3 Step" Instructions for Use on the label make the product easy to use.

Until now, the problem with using test strips has been that the bottle provided insufficient protection and the dry pouch placed inside could only guarantee 18 months of use.
Add to this that one could assume the remaining strips would start losing their effectiveness after the bottle was opened because of the infiltration of humidity. The Pool-I.D Easy Dip Test Strips are packaged 10 each in foil packs.
In each can, there are 5 foil packs, that is 50 strips. This protection guarantees a 3 year shelf life from the date of manufacture, thus ensuring the last strip.