Own Label Shock Granules

• Maintain pH levels with in the ideal range 7.2–7.6. If the level is not in this range, adjust.
• Shock procedures are recommended either weekly or fortnightly.
• Pre-dissolve this product in a clean plastic container.
• Stir well to ensure product is fully dissolved.
• Add the resulting solution to the pool whilst the pump (s) are turned ‘on’ – preferably near the water inlets to aid distribution.
• Repeat dose/application if necessary to achieve the desired level.
• After using this product pool water may become temporarily cloudy, so keep the filtration pump running until it clears.
• After shock treatment, allow the chlorine to drop below 5mg/l before bathing recommences, and in any event wait for at least 30 minutes before bathing recommences.

Looking After Your Above Ground Swimming Pool Water