Bromine Granules

Description

Bromine Granules are ideal for daily dosing of your spa, to produce active bromine which kills bacteria and other potentially harmful organisms.

• They are rapid dissolving and have minimal impact on pH
• Use spa test strips and ph balance products to maintain pH level within the ideal range of 7.2 – 7.6.
• Maintain bromine residuals for spas within the range 3 -5 mg/l (ppm)
• These bromine granules may be applied directly to spas where temperatures exceed 20 degrees C.
• If below this temperature or if in doubt pre-dissolve the chlorine granules in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1lt) of water.
• Stir well to ensure the chlorine is fully dissolved.
• Carefully add the resulting solution to the spa whilst the pump(s) are turned on, preferably near the water inlets and jets to aid distribution.
• Repeat dose application if necessary to achieve levels in point 2 above.
• Use spa test strips to check the chlorine level is within the range 3 – 5mg/l (ppm) before bathing recommences.

It is recommended that you periodically shock dose your spa with Aquasparkle spa fusion.

Looking After Your Above Ground Swimming Pool Water