Kleen Pool Algaecide

Description

Kleen Pool Algaecide is a copper based product that remains active in the pool for up to 6 months. Use after commissioning your pool in the spring or to close down your pool in the winter to keep your pool water sparkling clear and free of algae. Remember, algae prevention is always better than cure.

Algaecide Instructions:

• Badly scaled pools may cause elevated pH conditions above the recommended range.
• Pools with scale should be descaled before using Kleen Pool.
• Before adding Kleen Pool LongLife Algaecide, adjust pool pH to 7.2 and maintain the range of 7.2-7.6 to ensure maximum effectiveness.
• Not recommended for use in pools where the pH cannot be maintained in the 7.2-7.6 range.

Application Installation:

• Maintain pH level within the ideal range of 7.2 – 7.6. If not in this range, adjust.
• Check the chlorine level and ensure it is established within the ideal range 1 – 3mg/l (ppm).
• Gradually pour the solution into the pool, whilst the pump(s) are turned ‘on’, preferably near the water inlets to aid distribution.
• After the initial dose this product should last for up to six months before further top-ups are required.

Winterising Your Swimming Pool