pH Increaser Granules

Description

pH Increaser Granules

pH Increaser Granules  should be used for raising the pH in pool water.

The ideal pool pH level is between 7.2 – 7.6, promoting bather comfort, optimal chemical efficiency and protection of pool plant equipment.

Apply when the pH falls below 7.2. Note: A number of applications of pH Plus  may be necessary.

Balancers – Balance your spa water

Establishing and maintaining the correct water balance is important for a number of reasons:

• Chemical efficiency
• Bather comfort
• Protection of pool and plant room equipment
• Water quality and appearance
• Makes it easier and less time consuming to look after the spa

1. PH Plus is the best way to increase a hot tub or pool’s pH levels if they have dropped below the recommended amount.
2. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons of clean warm water.
3. Stir well to ensure product is fully dissolved.
4. Carefully add the solution to the pool whilst the pump or pumps are turned on
5. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established.

Looking After Your Above Ground Swimming Pool Water